{"product_id":"dr-schutz-medica-seidenglanz-hartbeschichtung-pflegefilm-sanierung-im-praxis-pflegebereich","title":"Medica hard coating","description":"\u003cp\u003e \u003cspan\u003e\u003cstrong\u003eMedica hard coating\u003c\/strong\u003e\u003cbr\u003e A special metal-crosslinked dispersion care product. Protects the floor with an elastic, slip-resistant, satin-gloss care film with increased resistance to disinfectants and alcohol-based preparations compared to conventional hard sealants (e.g., Dr. Schutz Secura Hard Sealant). Dirt adhesion is reduced and routine cleaning is facilitated. Also suitable for high-speed cleaning of the care film.\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\n\u003cp\u003e \u003cstrong\u003eProduct description\u003c\/strong\u003e\u003cbr\u003e Special water-based polymer coating. Glossy. For the initial care and refreshment of deep-cleaned or post-construction clean non-absorbent floors. For professional use in buildings. Recommended in the healthcare sector for cleanability and optimized disinfection. \u003cbr\u003e− With increased resistance to disinfectants and alcohol-based preparations compared to conventional hard coatings. Further resistance enhancement and a matte surface appearance are possible with a 2K lacquer sealant.\u003cbr\u003e − Reduces dirt adhesion and maintenance effort.\u003cbr\u003e − High solid content.\u003cbr\u003e − Wax-containing polymer dispersion, without zinc, without TBEP.\u003cbr\u003e − Suitable for high-speed treatment film restoration.\u003cbr\u003e\u003cbr\u003e Suitable for closed-pore, non-absorbent surfaces.\u003cbr\u003e − PVC \/ LVT\u003cbr\u003e − Linoleum, if open-pored after priming with Lino Primer.\u003cbr\u003e − Sealed wooden floors\u003cbr\u003e − The application on PU\/EP self-levelling coatings, polyolefin, rubber and stone floors must be tested on a project-specific basis.\u003cbr\u003e Please refer to our flooring and property-specific care instructions at www.dr-schutz.com.\u003c\/p\u003e\n\n\u003cp\u003e \u003cstrong\u003eApplication\u003c\/strong\u003e \u003cbr\u003eShake well. Apply undiluted at a temperature of at least 15°C using the Dr. Schutz Wischwiesel or Dr. Schutz Profi Wischmop in an even, thin film to the final-cleaned or thoroughly cleaned and dried surface in the direction of installation. For increased protection, repeat the application when the protective film is firm to touch.\u003c\/p\u003e\n\n\u003cp\u003e \u003cstrong\u003eNotes\u003c\/strong\u003e\u003cbr\u003e − The substrate must be professionally prepared. It must be free of any care product residue and any old, non-adherent coatings, and be roughened, clean, dry, and free of oil, wax, and dust. (*)\u003cbr\u003e − Avoid strong sunlight and drafts when applying.\u003cbr\u003e − Turn off the underfloor heating in good time beforehand.\u003cbr\u003e − If necessary, further orders can be placed after intensive cleaning.\u003cbr\u003e − The floor and material temperature must not be below +15°C during application and drying.\u003cbr\u003e Optimal conditions are in the range of 18-25 °C.\u003c\/p\u003e\n\n\u003cp\u003e \u003cstrong\u003econsumption\u003c\/strong\u003e\u003cbr\u003e 25-30 g\/m² per application (coverage: 30-40 m²\/l)\u003c\/p\u003e","brand":"Dr. Schutz","offers":[{"title":"5 liters","offer_id":54121536520518,"sku":"2950000590","price":177.4,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3277\/5750\/files\/Dr._Schutz_Medica_Hartbeschichtung.png?v=1757670167","url":"https:\/\/obag.swiss\/en\/products\/dr-schutz-medica-seidenglanz-hartbeschichtung-pflegefilm-sanierung-im-praxis-pflegebereich","provider":"Oscar Bernet AG","version":"1.0","type":"link"}