Floor shine

Floor shine
Polyurethane-based polymer dispersion for the initial care of resilient floor coverings in commercial buildings when the use of a hard sealer or PU sealant is not possible. Also ideal for quickly refreshing PU-treated floors. Ideal for the care and maintenance of resilient floor coverings in the home. Glossy finish.

Product description
Special water-based polymer coating. Glossy. For the initial care and refreshment of deep-cleaned or post-construction clean non-absorbent floors. For use in residential and commercial areas.
− Metal-free polymer dispersion.
− Protects the soil.
− Reduces dirt adhesion and maintenance effort.
− Good heel mark resistance
− Facilitates maintenance cleaning.
− Suitable for routine cleaning of sports floors.
Substrates:
− PVC / LVT
− Linoleum, if open-pored after priming with Lino Primer.
− Sealed wooden floors
The application on PU/EP self-leveling coatings, polyolefin, rubber and stone floors must be tested on a project-specific basis.

Application
Clean the floor thoroughly before use. We recommend using a green pad and Basic Cleaner R. Shake well. Apply undiluted at a temperature of at least 15°C using the Dr. Schutz Wischwiesel or the Dr. Schutz Profi Wischmop in an even, thin film to the surface, once it has been thoroughly cleaned and dried, in the direction of installation. For increased protection, repeat the application when the protective film is firm to touch.

Notes
− Avoid strong sunlight and drafts when applying.
− Turn off the underfloor heating in good time beforehand.
− If necessary, further orders can be placed after intensive cleaning.
− Avoid excessive build-up of care products that have darkened due to long-term use.

consumption
25-30 g/m² per application (coverage: 30-40 m²/l)