H2 Oil, water-based care oil, white

H2 Oil, water-based care oil, white
A water-based, white-pigmented, natural care oil for refreshing all oiled wood and cork floors. It gives the floor a pleasant, silky-matte finish. Regular cleaning of the refreshed wood or cork floor with Dr. Schutz Wood Soap White is simplified. It provides optimal protection.

Product description
A water-based dispersion care product with natural oil-based care components for regularly refreshing oiled wood and cork floors. This makes floor care easy. Simply apply with a mop and you're done – no polishing required. The floor receives a high-quality, satin-matt finish and optimal protection.
− Reduces dirt adhesion and maintenance effort.
− Protects the floor from abrasion and the wood from water
− Gives new appeal to old and dull floors.
− Ready to use.
− Regular cleaning of the treated surface is simplified. We recommend using wood soap.

Floor surfaces are subject to natural wear and tear depending on the level of use. For absorbent surfaces like wood, regular maintenance is essential to maintain their value and prevent damage. If the surface has become damaged down to the wood through use, it must be sanded and resealed or oiled to restore it.
Please refer to our flooring and property-specific care instructions at www.dr-schutz.com.

Application
For light soiling and for final cleaning, clean the wood or cork floor beforehand with Dr. Schutz Wood Soap combined with a green pad. For heavy soiling or walkways, clean beforehand with Dr. Schutz Intensive Cleaner, diluted 1:1 to 1:3 in water, and a green pad. After the surface is completely dry, apply the initial treatment.
Shake well. Apply undiluted at a temperature of at least 15°C using the Dr. Schutz Wischwiesel or Dr. Schutz Profi Wischmop in an even, thin film to the final-cleaned or thoroughly cleaned and dried surface in the direction of installation. For increased protection, repeat the application when the protective film is firm to touch.

Notes
− Avoid strong sunlight and drafts when applying.
− Turn off the underfloor heating in good time beforehand.
− Soil and material temperatures must not fall below +15°C during application and drying. Optimal conditions are between 18 and 25°C.
− Clean the equipment with water. Cured product residues can only be removed mechanically.

consumption
20–25 ml/m² (40 m²/l).