Full care matt

Full care matt
Polyurethane-based polymer dispersion for the initial care of resilient floor coverings in commercial buildings when the use of a hard sealer or PU sealant is not possible. It is also ideal for quickly refreshing PU-treated floors. Ideal for the care and maintenance of resilient floor coverings in the home. Matte finish. Slip-resistant.

Product description
Special water-based polymer coating. Matte, for matte floors. For the initial care and refreshment of deep-cleaned or post-construction clean non-absorbent floors. For use in residential and commercial areas.
− Protects the soil
− Reduces dirt adhesion and maintenance effort.
− Facilitates maintenance cleaning.
− Metal-free polymer dispersion.

Substrates:
− PVC / LVT
− Factory and handcrafted PU-coated surfaces.
− Sealed wooden floors
− The application on PU/EP self-levelling coatings, polyolefin, rubber and stone floors must be tested on a project-specific basis.

Please refer to our flooring and property-specific care instructions at www.dr-schutz.com.

Application
Clean the floor thoroughly before use. We recommend using a green pad and Basic Cleaner R or PU Cleaner.
Shake well. Apply undiluted at a temperature of at least 15°C using the Dr. Schutz Wischwiesel or Dr. Schutz Profi Wischmop in an even, thin film to the final-cleaned or thoroughly cleaned and dried surface in the direction of installation. For increased protection, repeat the application when the protective film is firm to touch.

Notes
− Avoid strong sunlight and drafts when applying.
− Turn off the underfloor heating in good time beforehand.
− Avoid excessive buildup of care products and those that have darkened due to prolonged use. An occasional thorough cleaning removes all care components, worn-out care films, and any accumulated dirt from the surface. We recommend: Deep Cleaner R. After a thorough cleaning, a floor must be re-treated.

consumption
Initial care/refreshment: 25-30 g/m² per application (coverage: 30-40 m²/l)
Wipe care: 0.1 liters per 100 m²